Description

features:

• 3D CAD designed for a precise fit and finish
• Fits 2024 Toyota Tacoma
• Drilling is not required to install the compressor mount
• Fabricated 3/16 from sheet metal for durability.
• Bolts directly into the rear frame cross bar above the spare tire.
• Designed for the Twin ARB onboard air compressor.
• 55-1103-G4-S1: Air Chuck and Switch Mount for Tacomas Equipped with the 400W Inverter option.
• 02-1103-ARB-13: Required for Twin ARB compressor on Non-Hybrid Tacoma.
• 02-1103-ARB-9: Required for Twin ARB compressor on Hybrid Tacoma.
• Ships powder-coated black.
• Not compatible with 00-1103-ACSM, 00-1103-SMK, and 00-1103-ACM.
• Willfit with OEM Pullout Step installed.
• Difficulty of Installation: Easy
• Install Time: Approx. 2 Hours (not including wiring)

PRODUCT add ons:

SDHQ Built 7.5′ Air Chuck/Switch Mounting Kit (SDHQ-00-1104-BK1):

• • 3D CAD designed for a precise fit and finish
  • Designed to fit vehicles equipped with a rear mounted air compressor.
  • *Drilling is required for install.
  • Perfect for mounting an air chuck in the rear bumper or in the bed of a truck.
  • Utilizes a Recessed Air Chuck Bulkhead (00-1104-BH1)
  • Includes 7.5ft 3/8″ Airline Kit (00-1004-38-075)
  • Includes Recessed Switch Mount (00-1103-RSM)
  • Some Molle Panels may interfere with mounting in the bedside
  • Difficulty of Installation: Easy
  • Install Time: Approx. 1 Hour (not including wiring)

SDHQ Built ARB Twin 10′ Switch Wiring Kit (SDHQ-02-1103-ARB-S2):

• • Connects ARB Twin Compressor to ARB switch (comes w/ compressor)
  • Comes pinned for ARB Switch
  • Extra wires, terminals, and connector included for wiring to an ARB switch
  • Built with Premium Materials
    • TXL Cross-Linked Wire
    • Flexo braided Loom
    • DSG Dual Wall Heat Shrink Tubing
  • Not compatible with ARB air locker wiring harness

SDHQ Built 2024 Tacoma Bed Power Port Air Chuck and Switch Mount (SDHQ-55-1103-G4-S1)

• • 3D CAD designed for a precise fit and finish
  • Fits 2024 Toyota Tacoma with Inverter and Bed Power Port Option (PT949-35340)
  • Not compatible with Tacomas equipped with the Toyota Tire Inflator
  • Drilling is required for install
  • Fabricated from 14 Ga Stainless Steel for durability.
  • Fits into the rear power cubby and includes sealing washers and
  • grommets to maintain a waterproof seal
  • Utilizes BH1 Bulkhead Air Chuck and has a cutout for an ARB Switch (Contura)
  • We paired this option with the Switch Wiring Kit (SDHQ-02-1103-ARB-S2) to complete the switch wiring for the installation
  • Difficulty of Installation: Easy
  • Install Time: Approx. 2 Hours (not including wiring)

Non-Hybrid ONLY – ARB Twin 10′ Switch-Pros Connect Wiring Kit (SDHQ-02-1103-ARB-SP):

• • Connects ARB Twin Compressor to Switch Pros style 12V trigger output
  • Comes pinned for Switch Pros style trigger
  • Built with Premium Materials
    • • TXL Cross-Linked Wire
      • Flexo braided Loom
      • DSG Dual Wall Heat Shrink Tubing
  • Not compatible with ARB air locker wiring harness

Hybrid Model ONLY – ARB Twin 20′ Switch-Pros Connect Wiring Kit (SDHQ-02-1103-ARB-SPX):

• • Connects ARB Twin Compressor to Switch Pros style 12V trigger output
  • Comes pinned for Switch Pros style trigger
  • Built with Premium Materials
    • TXL Cross-Linked Wire
    • Flexo braided Loom
    • DSG Dual Wall Heat Shrink Tubing
  • Not compatible with ARB air locker wiring harness

SDHQ Built ARB Filter Relocation Kit (SDHQ-50-1103-FR):

• • 3D CAD designed for a precise fit and finish
  • Designed to work specifically with ARB Twin Air Compressors
  • Not compatible with ARB Single Air Compressors or Viair Air Compressors
  • Requires no drilling for installation
  • Includes high-quality hardware made of Class 10.9 steel and 18-8 stainless steel
  • Uses industry-standard 3/8″ push-to-connect cartridges
  • Incorporates bronze air filters for added protection
  • Utilizes a billet aluminum block to house the filters and cartridges
  • Features a corrosion-resistant and strong stainless steel bracket
  • Superior water, mud, and dirt protection (mounts above passenger rear wheel liner on Sequoia, bed support behind the taillight on Tundra and Tacoma)
  • Easy to install (approximately 1 hour)

INSTALL INSTRUCTIONS

If you have the time, consider leaving us a review – your opinion and experience are important to us!